Moisture-curing, colourless impregnation Wikulac FH 20

Product description

Moisture curing, colorless impregnation Wikulac FH 20 for protection against damp and efflorescence (salt bloom on walls, masonry and plaster).

- For renovation and prevention of moisture damage (e.g. salt efflorescence, loose, hollow plaster, etc.)

- For sealing against moisture and strengthening mineral substrates before subsequent color coating (e.g. floors in a garage or cellar)

- For impregnation or sealing of worn, crumbly screeds (e.g. in warehouses)

- For consolidation of rotten wood that does not have a static function

Do not use on large areas in inhabited interiors!

The product is intended for professional use only!

Product properties:

• one-component, with moisture reacting coating - creates chemically resistant plastic (polyurea)
• deeply penetrating
• protects against efflorescence of salts and penetration of moisture into masonry, plaster, etc.
• prevents paint and plaster from being pushed away from the substrate
• stops the rising humidity of the walls (not in the case of pressurized water)
• protects against mold caused by rising wall moisture (not in the case of condensation)
• has a strong reinforcing effect
• largely resistant to chemicals (see table)
• fully mechanically resistant (resistant to the passage of forklift trucks)

Durability (6 months trial period):

Permanent effect on the non-porous coating (film)

distilled water, okay
drinking water, okay
sea water, okay
sulfuric acid 10%, okay
hydrochloric acid 10%, okay
nitric acid 10%, okay
lactic acid 25%, okay
citric acid 10%, okay
tannic acid solution, okay
linseed oil fatty acid, okay
soda solution 20%, okay
table salt solution 10%, okay
sugar solution 30%, okay
potassium liquor 10%, okay
free chlorine, okay
hydrogen peroxide, okay
benzine super, okay
xylene, okay
ethyl glycol actetate, okay
alcohol 10%, okay

Application: Pay attention to the instructions given in the technical data sheet

Substrates (absorbent only): All absorbent water- and solvent-resistant substrates such as stone, concrete, cement plaster and wood.

Consumption:

approx. 100 - 200 ml/m² per coat

Color shades:

Colorless

Warning:

Ensure sufficient ventilation!